SN74V293-15PZAG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74V |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74V293 |
| Function | Synchronous |
| Current - Supply (Max) | 35mA |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.45V |
| Supply Voltage-Min (Vsup) | 3.15V |
| Number of Circuits | 2 |
| Memory Size | 1.125M 64K x 18 128K x 9 |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Access Time | 10ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Organization | 64KX18 |
| Output Characteristics | 3-STATE |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | Yes |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 15 ns |
| Height | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74V293-15PZAG4 Overview
80-LQFP is the package in which FIFO memory chip is contained.There is a case Tube in which it is packaged.There is a memory of 1.125M 64K x 18 128K x 9 on the FIFO chip that can be used to store applications and data.It is recommended that the temperature be regulated to 0°C~70°C to ensure reliable operation.There is a mounting type of Surface Mount on the FIFO memory.Operating voltage is 3.15V~3.45V .It is a component from the 74V series.As far as operating current is concerned, it has a maximum of 35mA .Mounting it in Surface Mount is recommended.Memory IC is a member of the 74V293 family.If the supply voltage is set to 3.3V , high efficiency can be achieved.A total of 80 terminations can be found in FIFO means.The operation pins are 80 pins.FIFO design requires 35mA amps of current to operate.A 3.3V supply voltage will ensure FIFO's maximum efficiency.The gadget is self-contained and can be found in FIFOs .It has a type OTHER FIFO memory IC.In the presence of a 66.7MHz frequency, it can maintain good accuracy.Voltage FIFO memory IC's maximum is set to 3.45V .Ideally, the supply voltage (Vsup) should stay above 3.15V .With 2 circuits, FIFO memory chip offers enhanced flexibility.
SN74V293-15PZAG4 Features
1.125M 64K x 18 128K x 9 memory size
74V series
Best part number of 74V293
FIFOs category
SN74V293-15PZAG4 Applications
There are a lot of Texas Instruments SN74V293-15PZAG4 FIFOs Memory applications.
- Extended product life cycle
- Video time base correction
- Controlled baseline
- IP Radio
- Multi-stage synchronizer
- Notebook
- Magnetic memories
- Product traceability
- Programmable Logic Controller
- Rate buffers
