banner_page

SN74V293PZAEP

80 Terminations3.3V 80 Pin 74V293 FIFO memory IC74V Series 1.125M 64K x 18 128K x 95ns


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74V293PZAEP
  • Package: 80-LQFP
  • Datasheet: PDF
  • Stock: 157
  • Description: 80 Terminations3.3V 80 Pin 74V293 FIFO memory IC74V Series 1.125M 64K x 18 128K x 95ns (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 80-LQFP
Number of Pins 80
Weight 639.990485mg
Operating Temperature -55°C~125°C
Packaging Tray
Series 74V
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 4 (72 Hours)
Number of Terminations 80
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FIFOs
Technology CMOS
Voltage - Supply 3.15V~3.45V
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Frequency 133MHz
Base Part Number 74V293
Function Synchronous
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.45V
Supply Voltage-Min (Vsup) 3.15V
Number of Circuits 2
Memory Size 1.125M 64K x 18 128K x 9
Element Configuration Dual
Nominal Supply Current 35mA
Max Supply Current 35mA
Access Time 5ns
Data Bus Width 18b
Direction Unidirectional
Organization 64KX18
Output Characteristics 3-STATE
Density 1.1 Mb
Standby Current-Max 0.015A
Parallel/Serial PARALLEL
Memory IC Type OTHER FIFO
Bus Directional Uni-Directional
FWFT Support Yes
Output Enable YES
Expansion Type Depth, Width
Cycle Time 7.5 ns
Height 1.6mm
Length 14mm
Width 14mm
Thickness 1.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74V293PZAEP Overview


You will find FIFO memory chip in the 80-LQFP package.This FIFO memory chip is packaged as a Tray .Apps and data can be stored in the 1.125M 64K x 18 128K x 9 memory of the FIFO chip.To ensure reliable operation, the temperature should be regulated to -55°C~125°C .It is a Surface Mount mounting type FIFO memory.A supply voltage of 3.15V~3.45V is required for its operation.It is a component from the 74V series.The recommended mounting way is Surface Mount .Memory IC belongs to the family of 74V293 .When the supply voltage is 3.3V , high efficiency is possible.A total of 80 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 80 pins.In order for FIFO design to operate, a maximum current of 35mA is required.In order to maximize efficiency, the supply voltage should be set to 3.3V .The gadget in FIFOs is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.In spite of the frequency 133MHz , it is capable of maintaining a good level of accuracy.There is a FIFO memory IC's maximum supply voltage of 3.45V .Ideally, the supply voltage (Vsup) should stay above 3.15V .FIFO memory chip offers enhanced flexibility due to its use of 2 circuits.

SN74V293PZAEP Features


1.125M 64K x 18 128K x 9 memory size
74V series
Best part number of 74V293
FIFOs category

SN74V293PZAEP Applications


There are a lot of Texas Instruments SN74V293PZAEP FIFOs Memory applications.

  • Smart Meter
  • Firmware loaders
  • Telecommunication
  • Communications Systems
  • Extended product-change notification
  • Test Equipment
  • High-speed disk
  • Extended product life cycle
  • Alarm System
  • Optical memories

Write a review

Note: HTML is not translated!
    Bad           Good