SN74V3660-6PEU
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Number of Pins | 128 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74V |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 166MHz |
| Base Part Number | 74V3660 |
| Function | Synchronous |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.45V |
| Supply Voltage-Min (Vsup) | 3.15V |
| Number of Circuits | 2 |
| Memory Size | 144K 4K x 36 |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Access Time | 4.5ns |
| Data Bus Width | 36b |
| Direction | Unidirectional |
| Organization | 4KX36 |
| Output Characteristics | 3-STATE |
| Density | 144 kb |
| Parallel/Serial | PARALLEL |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | Yes |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 6 ns |
| Height | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74V3660-6PEU Overview
You can find FIFO memory chip in the 128-LQFP package.In terms of packaging, it comes in Tray cases.A FIFO chip's memory is 144K 4K x 36 , which may be used to store applications and data.It is recommended that the temperature of the system be regulated to 0°C~70°C for reliable operation.A mounting type of Surface Mount is associated with the FIFO memory.For operation, it requires a supply voltage of 3.15V~3.45V .The 74V series contains this memory logic.Mounting it in Surface Mount is recommended.The 74V3660 family of objects contains it.A supply voltage of 3.3V allows for high efficiency.A total of 128 terminations can be found in FIFO means.128 pins are the operation pins.FIFO design requires 40mA amps of current to operate.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.In FIFOs , this gadget is self-contained.The IC of the part is of the type OTHER FIFO .Despite a frequency of 166MHz , it is capable of maintaining good accuracy.It is set to 3.45V volts for the FIFO memory IC's maximum supply voltage.Ideally, the supply voltage (Vsup) should stay above 3.15V .Due to the use of 2 circuits, FIFO memory chip has an enhanced level of flexibility.
SN74V3660-6PEU Features
144K 4K x 36 memory size
74V series
Best part number of 74V3660
FIFOs category
SN74V3660-6PEU Applications
There are a lot of Texas Instruments SN74V3660-6PEU FIFOs Memory applications.
- Signal processing
- Disk Controllers
- Measurement Equipment
- IP Camera Buffer
- Consumer Systems
- Tape controllers
- Emulators
- Magnetic memories
- Routers
- Alarm System
