SN74V3670-7PEU
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Number of Pins | 128 |
| Weight | 614.986205mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74V |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 133.3MHz |
| Base Part Number | 74V3670 |
| Function | Synchronous |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.45V |
| Supply Voltage-Min (Vsup) | 3.15V |
| Number of Circuits | 2 |
| Memory Size | 288K 8K x 36 |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Access Time | 5ns |
| Data Bus Width | 36b |
| Direction | Unidirectional |
| Organization | 8KX36 |
| Density | 288 kb |
| Parallel/Serial | PARALLEL |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | Yes |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 7.5 ns |
| Height | 1.4mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74V3670-7PEU Overview
This package is included in 128-LQFP .The package comes in a case of Tray .Data and applications can be stored in the FIFO chip's 288K 8K x 36 memory.To ensure reliable operation, the temperature should be regulated to 0°C~70°C .This FIFO memory has a mounting type of Surface Mount .For operation, a voltage of 3.15V~3.45V is used.This memory logic is part of the 74V series.Mounting it Surface Mount is recommended.In terms of its family, it is part of the 74V3670 family.Supply voltages of 3.3V are capable of achieving high efficiency.128 terminations are contained in FIFO means.These are the 128 pins for operation.FIFO design requires 40mA amps of current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .A self-contained gadget is contained within FIFOs .This part has a memory type of OTHER FIFO .When the frequency is set to 133.3MHz , the system can maintain good accuracy.There is a FIFO memory IC's maximum supply voltage of 3.45V (Vsup).A voltage above 3.15V is necessary for normal operation.With 2 circuits, FIFO memory chip offers enhanced flexibility.
SN74V3670-7PEU Features
288K 8K x 36 memory size
74V series
Best part number of 74V3670
FIFOs category
SN74V3670-7PEU Applications
There are a lot of Texas Instruments SN74V3670-7PEU FIFOs Memory applications.
- Signal processing
- Desktop Computers
- SPI Bus Flash Memory Devices
- Consumer
- General Data Collection Applications at Extreme High-Temperatures
- TVs
- Routers
- Portable Information Devices
- Game Controller
- Switches
