Parameters |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Base Part Number |
74VMEH22501 |
Pin Count |
56 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.45V |
Supply Voltage-Min (Vsup) |
3.15V |
Number of Circuits |
8-Bit and Dual 1-Bit |
Number of Ports |
2 |
Number of Bits |
10 |
Propagation Delay |
10.1 ns |
Family |
74V |
Logic Function |
Transceiver |
Direction |
Bidirectional |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Current - Output High, Low |
12mA 12mA; 48mA 64mA |
Logic Type |
Universal Bus Transceiver |
Output Polarity |
TRUE |
Max I(ol) |
0.012 A |
Prop. Delay@Nom-Sup |
14.5 ns |
Trigger Type |
POSITIVE EDGE |
Control Type |
COMMON CONTROL |
Power Supply Current-Max (ICC) |
30mA |
Height Seated (Max) |
1mm |
Length |
7mm |
Width |
4.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-VFBGA |
Number of Pins |
56 |
Weight |
58.796911mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74VMEH |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
HTS Code |
8542.39.00.01 |
Packing Method |
TAPE AND REEL |
Technology |
BICMOS |
Voltage - Supply |
3.15V~3.45V |
Terminal Position |
BOTTOM |
SN74VMEH22501GQLR Overview
There is an embedded version of it in the 56-VFBGA package. It is packaged in a way that resembles Cut Tape (CT). 8-Bit and Dual 1-Bit circuits are used to achieve its superior flexibility. Logic type Universal Bus Transceiver describes this electrical device. I have mounted this electronic part in the way of Surface Mount in this way. Over -40°C~85°C, the operating temperature should be higher. The high/low output current of 12mA 12mA; 48mA 64mA enables maximum design flexibility. It is a type of FPGA that belongs to the 74VMEH series of FPGAs. It operates at a voltage of 3.15V~3.45V. It is a member of the 74VMEH22501 family. It is possible to use 56 terminations, which are the ends of a transmission line which should be connected to a device whose characteristic impedance matches that of the transmission line. It is important to keep the supply voltage above 3.3V for normal operation. The 56 pin count is provided. The electronic part was designed using 10 Bits. It is possible to terminate a transmission line with a device that matches the line's characteristic impedance, known as 2 terminations. In this case, the electronic part is mounted in the direction of Surface Mount. 56 pins are used in the design. This electronic device belongs to the family of 74V. At this point, Vsup reaches its maximum value. It is necessary to have a greater supply voltage (Vsup) than 3.15V in order to operate correctly. There is a trigger configured with POSITIVE EDGE for this device. The reliability of this device makes it a great choice for TAPE AND REEL. It is important to note that this electrical part operates from a supply voltage of 3.3V.
SN74VMEH22501GQLR Features
56-VFBGA package
74VMEH series
74VMEH22501 family
56 pin count
56 pins
SN74VMEH22501GQLR Applications
There are a lot of Texas Instruments SN74VMEH22501GQLR Universal Bus Functions applications.
- Solar street light
- MPPT function (maximum power point tracking)
- Electric car
- Photovoltaic grid-connected power system
- CD player
- In-vehicle system
- Memory
- Microcontrollers
- Electronic and electrical project circuits
- Home theater