banner_page

SN75107AN

14 Terminations14 Pin SN75107 Receivers0/2 Drivers/Receivers2 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN75107AN
  • Package: 14-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 778
  • Description: 14 Terminations14 Pin SN75107 Receivers0/2 Drivers/Receivers2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 14-DIP (0.300, 7.62mm)
Number of Pins 14
Weight 927.99329mg
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type Receiver
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature ADDITIONAL COMMON STROBE INPUT
Technology BIPOLAR
Voltage - Supply ±4.75V~5.25V
Terminal Position DUAL
Number of Functions 2
Supply Voltage 5V
Base Part Number SN75107
Pin Count 14
Number of Channels 2
Operating Supply Current 30mA
Power Dissipation 1.15W
Output Characteristics TOTEM-POLE
Differential Output NO
Output Polarity TRUE
Input Characteristics DIFFERENTIAL
Max Dual Supply Voltage 5.25V
Number of Drivers/Receivers 0/2
Min Dual Supply Voltage 4.75V
Dual Supply Voltage 5V
Receiver Number of Bits 2
Interface Standard GENERAL PURPOSE
Negative Supply Voltage-Nom -5V
Supply Voltage1-Nom 5V
Height 5.08mm
Length 19.3mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN75107AN Overview


LED drivers benefit from this IC's enhanced 14-DIP (0.300, 7.62mm) package.The receiver is packaged in a Tube package.With its Receiver can transceiver design, this part can be incorporated into a wide range of solutions.You can place this wide receiver to any Through Hole-type PCB or development board.With respect to the power supply, this differential driver uses ±4.75V~5.25V.During operation, this electronic part may have up to 0/2 eligible receivers/drivers.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.Wide receiver can operate within the range of 5V supply voltages efficiently.This wide receiver has 14 terminations for driving and receiving data signals.It is packaged with 14 pinouts that are market standard for this particular transceiver.Since the part number SN75107 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation driver IC with 14 pins.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Through Hole mounting techniques.There are typically 2 bits of resolution specified in the specifications of this receiver.0 drivers are embedded on the integrator circuit.In addition, the optical transceiver module incorporates a ADDITIONAL COMMON STROBE INPUT function that improves the overall stability and accuracy of the signal management.With an input voltage of 30mA, this integrating circuit has the ability to drive LEDs with an output voltage of 30mA.It is recommended to keep the operating temperature of the line driver ic above -5V.This optical transceiver consists of a total of 2 channels embedded in it.As part of the design, this line driver integrator circuit has a dual supply voltage arrangement with a maximum of 5.25V.A power supply applcan transceiverable for 4.75V output is recommended when dealing with this can transceiver's dual supply voltage.

SN75107AN Features


Tube package
14 pin count
14 pins
2 channels

SN75107AN Applications


There are a lot of Texas Instruments SN75107AN Drivers/Receivers/Transceivers applications.

  • Aircraft positioning
  • Copper connection network
  • Clock radio
  • Desktop PC
  • Desktop radio
  • transmission relay
  • Metro access rings
  • Wireless smart house
  • Pocket PC
  • Interconnection between switches and computers

Write a review

Note: HTML is not translated!
    Bad           Good