SN751177N
| Parameters | |
|---|---|
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN751177 |
| Pin Count | 16 |
| Output Voltage | 15V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 32 |
| Operating Supply Current | 110mA |
| Nominal Supply Current | 110mA |
| Logic Function | Receiver |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 35 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 2 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -20°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
SN751177N Overview
This LED driver IC features an enhanced 16-DIP (0.300, 7.62mm) package for driving common LEDs.The receiver is packaged in a Tube package.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.This wide receiver can be placed on any Through Hole-type PCB or development board.This differential driver consumes 4.5V~5.5V for its power supplyAt any one time, this electronic part can have up to 2/2 eligible receivers/drivers.The operating temperature of this ic receiver is -20°C~85°C. It is primarily designed for applications with low temperatures.An output voltage range of 5V is sufficient to run this line driver ic efficiently.For driving and receiving signals from data, this wide receiver has 16 terminations integrated.A package consisting of 16 market standard pinouts is provided with this integrated circuit.Since the part number SN751177 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.16-pin driver chip with enhanced power dissipation.It is important to note that this ic receiver had a maximum resolution of 2 bits.This transceiver module is designed to operate from an input voltage supply of 5V.IC5V is a high performance driver IC designed to work with a 5V power supply.There are 1 transceivers in total implemented by this IC.There are also 2 receivers in it as well.It is capable of driving LEDs with a voltage of 110mA as the input voltage to this integrating circuit.Wide receiver provides the output voltage of 15V.A total of 32 circuits are integrated into this transceiver module, making it an extremely complex transceiver module.
SN751177N Features
Tube package
16 pin count
16 pins
5V power supply
SN751177N Applications
There are a lot of Texas Instruments SN751177N Drivers/Receivers/Transceivers applications.
- Servers
- Wireless modems
- Metro access rings
- Wireless projection application for conferences
- Fiber optic cable connection network
- Precision engineering measurement
- Wireless multimedia center in smart home
- High-speed computer links
- Military satellite communications
- Structural bonding
