SN751177NSR
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -20°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN751177 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 32 |
| Operating Supply Current | 110mA |
| Nominal Supply Current | 110mA |
| Max Supply Current | 110mA |
| Logic Function | Receiver |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| ESD Protection | No |
| Receive Delay-Max | 35 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
SN751177NSR Overview
Designed for common LEDs, this driver IC features an enhanced 16-SOIC (0.209, 5.30mm Width) package.This receiver is mounted in the Cut Tape (CT) package.The Transceiver can transceiver type enables this part to be used in a wide range of applications.The wide receiver can be mounted on any Surface Mount-type PCB or development board.A differential driver like this uses 4.5V~5.5V of power.Up to 2/2 receivers/drivers can be installed simultaneously on this electronic part.Applications with operating temperatures of -20°C~85°C have been designed primarily for this ic receiver.Driver ICs with a supply voltage range of 5V can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.This transceiver is packaged with 16 market standard pinoutsWith the part number SN751177 identifying the product type, temperature, package, etc., you can search with it to see more variants.This is a 16-pin driver IC with enhanced power dissipation control.In the case of this receiver, a resolution of 2 bits is typically specified.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.There is one driver IC in this package which is intended to be operated by 5V of power.In total, there are 1 transceivers implemented by this module isolated transceiver.2 drivers are embedded on the integrator circuit.With this integrating circuit you can drive LEDs of a voltage of up to 110mA. It can be used to drive large displays.In the case of input current exceeding 110mA, this can transceiver may malfunction.This transceiver module is composed of a total of 32 circuits which are integrated together.
SN751177NSR Features
Cut Tape (CT) package
16 pin count
16 pins
5V power supply
SN751177NSR Applications
There are a lot of Texas Instruments SN751177NSR Drivers/Receivers/Transceivers applications.
- Cell phones
- Satellite communications networks
- Switching system
- Wireless projection application for conferences
- Pocket PC
- Televisions
- Routers
- Fiber optic cable connection network
- Data center
- Notebook
