SN751178N
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN751178 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 110mA |
| Nominal Supply Current | 110mA |
| Max Supply Current | 110mA |
| Logic Function | Receiver |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| ESD Protection | No |
| Receive Delay-Max | 35 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Number of Transmitters | 2 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -20°C~85°C |
| Packaging | Tube |
SN751178N Overview
Due to the enhanced 16-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.The package of this receiver is Tube.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Through Hole-type PCB or development board, this wide receiver can be placed.This differential driver requires a 4.5V~5.5V power supply.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.As its name implies, this ic receiver is designed for applications where -20°C~85°C is the operating temperature.Driver ICs with a supply voltage range of 5V can operate efficiently.ICs that are packaged with market standard pinouts are available on the market.Since the base part number SN751178 describes the product type, temperature, package, etc., you might get more options by searching with it.16-pin driver IC with improved power dissipation control.It was possible to achieve a 2-bit resolution through this ic receiver.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There are two types of input voltage supply available for this IC, 5V.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.Input voltage is set to a value of 110mA, and this integrating circuit is capable of driving LEDs with that voltage.2 transmitters are present, which are can transceivers that produce radio waves to transmit or send data with the help of antennas.If the input current exceeds 110mA, this can transceiver could malfunction.I would like to highlight the fact that this transceiver module contains a total of 1 circuits.
SN751178N Features
Tube package
16 pin count
16 pins
5V power supply
SN751178N Applications
There are a lot of Texas Instruments SN751178N Drivers/Receivers/Transceivers applications.
- Fiber optic cable connection network
- Sensor reporting
- Portable radio
- Pocket PC
- Copper connection network
- Bridges
- Switching system
- Wireless HD Photography
- Cable network front end
- Satellite ground stations
