SN75119P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | SN75119 |
| Pin Count | 8 |
| Power Supplies | 5V |
| Operating Supply Current | 60mA |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Full |
| Interface Standard | GENERAL PURPOSE |
| Receive Delay-Max | 75 ns |
| Transmit Delay-Max | 30 ns |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 1 |
| Out Swing-Min | 2 V |
| High Level Input Current-Max | 0.00004A |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75119P Overview
Designed for common LEDs, this driver IC features an enhanced 8-DIP (0.300, 7.62mm) package.In the Tube package, this receiver is mounted.As a Transceiver can transceiver, this part has enabled many applications to be served.PCB or development board with Through Hole-type connectors can accommodate this wide receiver.Power supply requirements for this differential driver are 4.5V~5.5V.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.An output voltage range of 5V is sufficient to run this line driver ic efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.In this package, you will find 8 market-standard pinouts for this transceiver.With the part number SN75119 identifying the product type, temperature, package, etc., you can search with it to see more variants.This is a 8-pin driver IC with enhanced power dissipation control.Package size is drastically reduced by downsizing ICs and mounting them in high-density Through Hole arrays.It was possible to achieve a 1-bit resolution through this ic receiver.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.In addition to that, it contains 1 receivers as well.Using the input voltage of 60mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.
SN75119P Features
Tube package
8 pin count
8 pins
5V power supply
SN75119P Applications
There are a lot of Texas Instruments SN75119P Drivers/Receivers/Transceivers applications.
- Clock radio
- Metro access rings
- Remote controls
- Home theater wiring-free
- Satellite radio receiver
- Wireless showroom
- Cell phones
- Remote controls
- Ship
- Datacom networking applications
