SN75157D
| Parameters | |
|---|---|
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Current Rating | 50mA |
| Base Part Number | SN75157 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| Data Rate | 4 Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS422, RS423 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/2 |
| Receiver Number of Bits | 2 |
| Receiver Hysteresis | 70mV |
| ESD Protection | No |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Technology | BIPOLAR |
SN75157D Overview
Due to the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.The receiver is packaged in a Tube package.With its Receiver can transceiver design, this part can be incorporated into a wide range of solutions.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.In terms of power supply, this differential driver utilizes 4.75V~5.25V.At any one time, this electronic part can have up to 0/2 eligible receivers/drivers.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.Driver ICs with a supply voltage range of 5V can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.ICs that are packaged with market standard pinouts are available on the market.For more variants of this part, try searching with the base part number SN75157, which indicates the product type, temperature, package, etc.An enhanced power dissipation control driver IC featuring 8 pins.It is typical for this receiver to have a resolution of 2 bits when it is specified.There is a 5V input voltage supply that can be used to operate this transceiver module.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.The integrator circuit has embedded 0 drivers.This integrating circuit is able to drive LEDs with an input voltage of 50mA.When the input current reaches or exceeds 50mA, this can transceiver could have mal-functions.This optical transceiver is embedded with 2 channels in total.
SN75157D Features
Tube package
8 pin count
8 pins
5V power supply
2 channels
SN75157D Applications
There are a lot of Texas Instruments SN75157D Drivers/Receivers/Transceivers applications.
- Indoor ad hoc meeting
- Point-to-point networking
- Single to Multimode Fiber Conversion
- Bar, KTV wireless entertainment
- IPTV front end
- Interconnection between switches and computers
- Mainframes, workstations or storage devices
- Wireless security systems
- Desktop PC
- Car alarm systems
