SN75172DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 537.308512mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Driver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | SN75172 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Data Rate | 4 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/0 |
| Number of Drivers | 4 |
| ESD Protection | Yes |
| Transmit Delay-Max | 65 ns |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.00036A |
| High Level Input Current-Max | 0.00002A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75172DW Overview
With the enhanced 20-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.The package of this receiver is Tube.The Driver can transceiver technology has enabled this part to power many solutions for a variety of uses.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver uses 4.75V~5.25V for power supply.During operation, this electronic part may have up to 4/0 eligible receivers/drivers.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.An operating voltage range of 5V is suitable for this line driver ic.20 terminations are integrated into this wide receiver for driving and receiving signals from data.This transceiver is packaged with 20 market standard pinoutsAs the base part number SN75172 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.A 20-pin driver IC with enhanced power dissipation control is featured here.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.This driver IC is designed to operate from a 5V power supply.The part is embedded with 4 drivers, so it can be used with 4 devices.A malfunction could occur when the input current exceeds 60mA.
SN75172DW Features
Tube package
20 pin count
20 pins
5V power supply
SN75172DW Applications
There are a lot of Texas Instruments SN75172DW Drivers/Receivers/Transceivers applications.
- Wireless multimedia center in smart home
- Metro access rings
- Fiber distributed data interface (FDDI)
- Wireless security systems
- Home theater wiring-free
- Cable network front end
- Precision engineering measurement
- Desktop radio
- Wired telephone
- Satellite ground stations
