SN75173D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | SN75173 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 70mA |
| Nominal Supply Current | 70mA |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Hysteresis | 50mV |
| Receive Delay-Max | 35 ns |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75173D Overview
An excellent driver IC for common LEDs thanks to its enhanced 16-SOIC (0.154, 3.90mm Width) package.In this package, the receiver is mounted in the Tube format.As a Receiver can transceiver, this part has enabled many applications to be served.On any Surface Mount-type PCB or development board, you can install this wide receiver.In terms of power supply, this differential driver utilizes 4.75V~5.25V.There can be up to 0/4 eligible receivers/drivers on the field at the same time with this electronic part.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.Wide receiver can operate within the range of 5V supply voltages efficiently.Wide receiver has 16 terminations built in for driving or receiving signals from data.This transceiver is packaged with 16 market standard pinoutsWith the part number SN75173 identifying the product type, temperature, package, etc., you can search with it to see more variants.16-pin driver chip with enhanced power dissipation.There are two types of input voltage supply available for this IC, 5V.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.The module isolated transceiver contains 4 receivers.The part is embedded with 0 drivers, so it can be used with 0 devices.It is capable of driving LEDs with a voltage of 70mA as the input voltage to this integrating circuit.
SN75173D Features
Tube package
16 pin count
16 pins
5V power supply
SN75173D Applications
There are a lot of Texas Instruments SN75173D Drivers/Receivers/Transceivers applications.
- Broadcast application
- Wireless security systems
- Single fiber bidirectional application
- Switching system
- Satellite radio receiver
- Gigabit Ethernet
- Radio transmission
- Wired telephone
- WDM transmission
- Datacom networking applications
