SN75174DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 537.308512mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Driver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | SN75174 |
| Pin Count | 20 |
| Output Voltage | 12V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 60mA |
| Nominal Supply Current | 60mA |
| Power Dissipation | 1.12W |
| Max Supply Current | 60mA |
| Data Rate | 4 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/0 |
| Driver Number of Bits | 4 |
| ESD Protection | Yes |
| Transmit Delay-Max | 65 ns |
| Supply Voltage1-Nom | 5V |
| High Level Input Current-Max | 0.00002A |
| Number of Transmitters | 4 |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75174DW Overview
An excellent driver IC for common LEDs thanks to its enhanced 20-SOIC (0.295, 7.50mm Width) package.The Tube package contains this receiver.With its Driver can transceiver design, this part can be incorporated into a wide range of solutions.Any Surface Mount-type PCB or development board can be used with this wide receiver.A power supply of 4.75V~5.25V is used by this differential driver.The field can have up to 4/0 eligible receivers/drivers at once when using this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.Driver ICs with a supply voltage range of 5V can operate efficiently.It is packaged with 20 pinouts that are market standard for this particular transceiver.Since the base part number SN75174 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation control driver IC featuring 20 pins.In terms of resolution, this ic receiver was capable of providing a 4-bit resolution.An input voltage supply of 5V is required to operate the transceiver module.It is designed so that it can be operated from a 5V power supply with this driver IC.This integrating circuit is able to drive LEDs with an input voltage of 60mA.In telecommunications, transmitters generate radio waves in order to transmit or send data through an antenna to transmit or send data using radio waves.A can transceiver that has a current input of 60mA or greater may be affected by malfunctions.A voltage of 12V can be delivered by Wide receiver.
SN75174DW Features
Tube package
20 pin count
20 pins
5V power supply
SN75174DW Applications
There are a lot of Texas Instruments SN75174DW Drivers/Receivers/Transceivers applications.
- Aircraft navigation
- Aircraft positioning
- Interconnection between switches and computers
- Satellite communications networks
- Copper connection network
- WDM transmission
- Switching system
- Wireless smart house
- Mainframes, workstations or storage devices
- Data center
