SN75174N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Driver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | SN75174 |
| Pin Count | 16 |
| Output Voltage | 12V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 60mA |
| Nominal Supply Current | 60mA |
| Power Dissipation | 1.15W |
| Output Current | -60mA |
| Max Supply Current | 60mA |
| Data Rate | 4 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/0 |
| Number of Drivers | 4 |
| Transmit Delay-Max | 65 ns |
| Supply Voltage1-Nom | 5V |
| High Level Input Current-Max | 0.00002A |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75174N Overview
Driver ICs with enhanced 16-DIP (0.300, 7.62mm) packages are excellent for driving LEDs with common characteristics.In this package, the receiver is mounted in the Tube format.It has proved to be a valuable component for a variety of applications since it is a Driver can transceiver.PCB or development board with Through Hole-type connectors can accommodate this wide receiver.It takes 4.75V~5.25V from the power supply to run this differential driver.The field can have up to 4/0 eligible receivers/drivers at once when using this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.With a voltage range of 5V, this driver IC can operate efficiently.16 terminations are integrated into this wide receiver for driving and receiving signals from data.There are 16 pinouts available on this transceiver which are market standard.Since the base part number SN75174 describes the product type, temperature, package, etc., you might get more options by searching with it.This is a 16-pin driver IC with enhanced power dissipation control.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Through Hole mounting techniques.There are two types of input voltage supply available for this IC, 5V.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.This electronic part can have?up to 4 eligible drivers on the field at once.?This integrating circuit is able to drive LEDs with an input voltage of 60mA.A can transceiver that has a current input of 60mA or greater may be affected by malfunctions.There is a capabilWide receivery to deliver voltage at 12V wWide receiverh this device.The output current of this bluetooth transceiver is -60mA.
SN75174N Features
Tube package
16 pin count
16 pins
5V power supply
SN75174N Applications
There are a lot of Texas Instruments SN75174N Drivers/Receivers/Transceivers applications.
- Wireless access points
- LAN, SAN, WAN (local, storage, work area networks)
- Ship
- AV receiver
- Clock radio
- interconnection between switches
- Ethernet circuitry
- Datacom networking applications
- Wireless showroom
- Laser diode bonding
