SN75182N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BUILT-IN LINE TERMINATION; RESPONSE CONTROL |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75182 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 10.2mA |
| Nominal Supply Current | 14mA |
| Max Supply Current | 14mA |
| Output Characteristics | TOTEM-POLE |
| Supply Type | Single |
| Differential Output | NO |
| Output Polarity | TRUE |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 0/2 |
| Receiver Number of Bits | 2 |
| Interface Standard | GENERAL PURPOSE |
| ESD Protection | No |
| Receive Delay-Max | 45 ns |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75182N Overview
An excellent driver IC for common LEDs thanks to its enhanced 14-DIP (0.300, 7.62mm) package.Tube package is used to mount this receiver.As a Receiver can transceiver, this part has enabled many applications to be served.Any Through Hole-type PCB or development board can be used with this wide receiver.It takes 4.5V~5.5V from the power supply to run this differential driver.This electronic part can have?up to 0/2 eligible receivers/drivers on the field at once.?In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.An output voltage range of 5V is sufficient to run this line driver ic efficiently.Wide receiver has 14 terminations built in for driving or receiving signals from data.In this package, you will find 14 market-standard pinouts for this transceiver.Since the base part number SN75182 describes the product type, temperature, package, etc., you might get more options by searching with it.Wide receiver with enhanced power dissipation control, 14-pin.Its package size is drastically reduced by downsizing ICs and utilizing high-density Through Hole mounting techniques.There is typically a resolution of 2 bits specified with this receiver.There are two types of input voltage supply available for this IC, 5V.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.On the part, 0 drivers are embedded in order to facilitate the operation of the device.Additionally, the optical transceiver module's BUILT-IN LINE TERMINATION; RESPONSE CONTROL function provides improved signal management accuracy and stability.Using the input voltage of 10.2mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.Input currents above 14mA could lead to mal-functions in this can transceiver.There are a total of 2 channels embedded in this optical transceiver.
SN75182N Features
Tube package
14 pin count
14 pins
5V power supply
2 channels
SN75182N Applications
There are a lot of Texas Instruments SN75182N Drivers/Receivers/Transceivers applications.
- Fiber optic cable connection network
- Bridges
- Telecom applications
- Single to Multimode Fiber Conversion
- Wireless projection application for conferences
- Wired telephone
- Metro access rings
- Radio transmission
- transmission relay
- Bar, KTV wireless entertainment
