SN75185DWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Base Part Number | SN75185 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | +-9V |
| Nominal Supply Current | 30mA |
| Propagation Delay | 315 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120 kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 3/5 |
| Dual Supply Voltage | 5V |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 3 |
| Number of Transceivers | 1 |
| Negative Supply Voltage-Nom | -9V |
| Supply Voltage1-Nom | 9V |
| Number of Receivers | 5 |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75185DWG4 Overview
This LED driver IC features an enhanced 20-SOIC (0.295, 7.50mm Width) package for driving common LEDs.The Tube package houses this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.This wide receiver can be placed on any Surface Mount-type PCB or development board.With respect to the power supply, this differential driver uses 4.5V~5.5V.As many as 3/5 receivers/drivers are eligible for use on this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.With a supply voltage range of 5V, this line driver ic operates efficiently.In order to drive and receive signals from data, this wide receiver has 20 terminations integrated.There are 20 pinouts available on this transceiver which are market standard.Since the base part number SN75185 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation control is provided by this 20-pin driver IC.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.There is a voltage supply of 5V required in order for this transceiver module to be operated.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.Driver ICs such as this one are designed to operate from +-9V power sources.In total, there are 1 transceivers implemented by this module isolated transceiver.Additionally, there are 5 receivers included in the package.This electronic part can have?up to 3 eligible drivers on the field at once.?According to the datasheet, when you try to enhance the line driver ic performance using negative voltage, -9V would be ideal for this purpose.
SN75185DWG4 Features
Tube package
20 pin count
20 pins
+-9V power supply
SN75185DWG4 Applications
There are a lot of Texas Instruments SN75185DWG4 Drivers/Receivers/Transceivers applications.
- Wired telephone
- Precision geodetic measurement
- Changeing the frequency from IF to RF
- LAN, SAN, WAN (local, storage, work area networks)
- Carrier phase observations
- Remote controls
- Single fiber bidirectional application
- Structural bonding
- IPTV front end
- Bridges
