SN75188N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Driver |
| Technology | BIPOLAR |
| Voltage - Supply | ±7.5V~15V |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 9V |
| Base Part Number | SN75188 |
| Pin Count | 14 |
| Output Voltage | 10.5V |
| Operating Supply Voltage | 9V |
| Nominal Supply Current | 34mA |
| Max Supply Current | 34mA |
| Data Rate | 300 kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | GATED |
| Max Dual Supply Voltage | 15V |
| Number of Drivers/Receivers | 4/0 |
| Driver Number of Bits | 4 |
| Min Dual Supply Voltage | 7.5V |
| Dual Supply Voltage | 9V |
| Interface Standard | EIA-232-E; TIA-232-E; V.28 |
| ESD Protection | No |
| Negative Supply Voltage-Nom | -9V |
| Transmit Delay-Max | 350 ns |
| Supply Voltage1-Nom | 9V |
| Output Low Current-Max | 0.00001A |
| Out Swing-Min | 12 V |
| High Level Input Current-Max | 0.00001A |
| Number of Transmitters | 4 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75188N Overview
LED drivers benefit from this IC's enhanced 14-DIP (0.300, 7.62mm) package.This receiver is mounted in the Tube package.Since this part is a Driver can transceiver, a number of solutions have been able to utiliDrivere it for various purposes.PCB or development board with Through Hole-type connectors can accommodate this wide receiver.This differential driver requires a ±7.5V~15V power supply.At any one time, this electronic part can have up to 4/0 eligible receivers/drivers.IC receiver has been designed primarily for applications operating at 0°C~70°C.9V is the supply voltage range that this line driver ic can efficiently operate with.There are 14 pinouts available on this transceiver which are market standard.With the part number SN75188 identifying the product type, temperature, package, etc., you can search with it to see more variants.It is a 14-pin driver IC with enhanced power dissipation controls.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Through Hole mounting techniques.Using this ic receiver, you were able to achieve a resolution of 4 bits.An input voltage supply of 9V is required to operate the transceiver module.A transmitter, or can transceiver that produces radio waves with the aid of an antenna, is used in telecommunications to transmit or send data.When the input current reaches or exceeds 34mA, this can transceiver could have mal-functions.It is recommended to keep the operating temperature of the line driver ic above -9V.At 10.5V, Wide receiver is able to deliver voltage to the load.It includes a dual supply voltage arrangement of 15V maximum that can be applied to this integrator circuit.This can transceiver works with dual supply voltage, so you should choose a power supply suitable for 7.5V.
SN75188N Features
Tube package
14 pin count
14 pins
SN75188N Applications
There are a lot of Texas Instruments SN75188N Drivers/Receivers/Transceivers applications.
- Satellite radio receiver
- Precision geodetic measurement
- AV receiver
- Tuner
- Long-distance fiber optic network applications
- Cable network front end
- Carrier phase observations
- Car alarm systems
- Wireless smart house
- Wireless projection application for business talks
