SN75188NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Driver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Voltage - Supply | ±7.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 9V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SN75188 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Nominal Supply Current | 34mA |
| Data Rate | 300 kbps |
| Output Characteristics | OPEN-COLLECTOR |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | GATED |
| Max Dual Supply Voltage | 15V |
| Number of Drivers/Receivers | 4/0 |
| Min Dual Supply Voltage | 7.5V |
| Dual Supply Voltage | 9V |
| Interface Standard | EIA-232-E; TIA-232-E; V.28 |
| Number of Drivers | 4 |
| Negative Supply Voltage-Nom | -9V |
| Transmit Delay-Max | 350 ns |
| Supply Voltage1-Nom | 9V |
| Out Swing-Min | 12 V |
| High Level Input Current-Max | 0.00001A |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75188NSR Overview
An excellent driver IC for common LEDs thanks to its enhanced 14-SOIC (0.209, 5.30mm Width) package.Tape & Reel (TR) package is used to mount this receiver.Several solutions have used this Driver can transceiver in a variety of applications due to its Driver IC nature.A Surface Mount-type PCB or development board can be used to place this wide receiver.A differential driver like this uses ±7.5V~15V of power.The field can have up to 4/0 eligible receivers/drivers at once when using this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.There is a voltage range of 9V for this line driver ic, so it can operate efficiently.14 terminations are integrated into this wide receiver for driving and receiving signals from data.There are 14 pinouts available on this transceiver which are market standard.With the part number SN75188 identifying the product type, temperature, package, etc., you can search with it to see more variants.A 14-pin driver IC with enhanced power dissipation control is featured here.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 9V.This electronic part can have?up to 4 eligible drivers on the field at once.?A temperature of at least -9V should be maintained when the line driver ic is in operation.A dual supply voltage arrangement of maximum 15V is included in this integrator circuit.If this can transceiver has a dual supply voltage, you should select a power supply that is suitable for 7.5V outputs.
SN75188NSR Features
Tape & Reel (TR) package
14 pin count
14 pins
SN75188NSR Applications
There are a lot of Texas Instruments SN75188NSR Drivers/Receivers/Transceivers applications.
- Changeing the frequency from IF to RF
- Sensor reporting
- Wireless transmission
- Gigabit Ethernet
- Servers
- Wired telephone
- Switching system
- Datacom networking applications
- Satellite communication
- Radio transmission
