SN75189D
| Parameters | |
|---|---|
| Terminal Pitch | 1.27mm |
| Current Rating | 20A |
| Base Part Number | SN75189 |
| Pin Count | 14 |
| Output Voltage | 5V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 26mA |
| Power Dissipation | 950mW |
| Data Rate | 1 Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Interface Standard | EIA-232-F; TIA-232-F; V.28 |
| Receive Delay-Max | 85 ns |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 4 |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESPONSE CONTROL |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
SN75189D Overview
An excellent driver IC for common LEDs thanks to its enhanced 14-SOIC (0.154, 3.90mm Width) package.This receiver is mounted in the Tube package.Since this part is a Receiver can transceiver, a number of solutions have been able to utiliReceivere it for various purposes.You can place this wide receiver to any Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 4.5V~5.5V.At any one time, this electronic part can have up to 0/4 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.With a voltage range of 5V, this driver IC can operate efficiently.Wide receiver has 14 terminations built in for driving or receiving signals from data.There are 14 pinouts available on this transceiver which are market standard.As the base part number SN75189 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.This is a 14-pin driver IC with enhanced power dissipation control.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.There is a voltage supply of 5V required in order for this transceiver module to be operated.This driver IC is designed to operate from a 5V power supply.In module isolated transceiver are 4 receivers.0 drivers are embedded on the integrator circuit.Additionally, this optical transceiver module features the RESPONSE CONTROL function, which improves the stability and accuracy of signal management in general.In addWide receiverion to delivering voltage at 5V, Wide receiver also has the abilWide receivery to measure voltage.
SN75189D Features
Tube package
14 pin count
14 pins
5V power supply
SN75189D Applications
There are a lot of Texas Instruments SN75189D Drivers/Receivers/Transceivers applications.
- Wireless network systems
- Fast Ethernet
- Remote controls
- Broadcast application
- Wireless transmission
- transmission relay
- Televisions
- Aircraft navigation
- Data center
- Ethernet circuitry
