SN75372D
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V 4.75V~24V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75372 |
| Pin Count | 8 |
| Output Voltage | 23.2V |
| Max Output Current | 500mA |
| Operating Supply Voltage | 7V |
| Nominal Supply Current | 24mA |
| Power Dissipation | 725mW |
| Output Current | 500mA |
| Max Supply Current | 24mA |
| Propagation Delay | 65 ns |
| Input Type | Inverting |
| Turn On Delay Time | 65 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 20 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.065 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Supply Voltage1-Nom | 20V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
SN75372D Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.There is a package in the form of Tube.The configuration is supported by 2 drivers.In the direction of Surface Mount, gate drivers is mounted.In the absence of a 4.75V~5.25V 4.75V~24V supply voltage, it can demonstrate its superiority.Gate type N-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of 0°C~70°C TA.Mosfet driver accepts input of type Inverting.It's configured with 8 terminations.There are various related parts under its base part number SN75372.In this case, Surface Mount indicates how the device is to be mounted.At the time of design, it is configured with 8 pins.A supply voltage of 5V is required for operation.NAND GATE BASED MOSFET DRIVER is employed as its interface IC.An output current as high as 500mA can be achieved at maximum power.There are several useful electronic components within its subcategory MOSFET Drivers.The board has a total of 8 component pins.Mosfet driver supports an output current of 500mA.According to its maximum power dissipation, 725mW is capable of conducting and transferring a large amount of power without overheating.To increase stability, keep the supply current at 24mA.The voltage it outputs is 23.2V.Mosfet gate drivers is recommended that the operating supply voltage be set to 7V.Mosfet gate drivers receives an input of STANDARD.
SN75372D Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 725mW
SN75372D Applications
There are a lot of Texas Instruments SN75372D gate drivers applications.
- Motor controllers
- Dual-Battery Systems
- Head-up and Head mounted displays
- Smart Phones
- DC/DC converters
- High frequency line drivers
- High-voltage isolated DC-DC converters
- Video amplifiers
- Portable computers
- Welding
