SN75372DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 20V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 24V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 725mW |
| Nominal Supply Current | 24mA |
| Power Dissipation | 725mW |
| Max Supply Current | 24mA |
| Current - Output | 500mA |
| Propagation Delay | 65 ns |
| Turn On Delay Time | 65 ns |
| Voltage - Output | 24V |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Number of Drivers | 2 |
| Turn On Time | 0.065 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Supply Voltage1-Nom | 20V |
| High Side Driver | NO |
| Turn Off Time | 0.05 µs |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN75372DG4 Overview
The SOIC package provides greater flexibility.This configuration includes 2 drivers.It's configured with 8 terminations.In this case, Surface Mount indicates how the device is mounted.Devices have 8 pins available.Specification is for 5V supply voltage operation.The interface IC of the device is NAND GATE BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 500mA.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The number of component pins is 8.Temperatures greater than 70°C are not allowed.Minimum operating temperatures are allowed to be 0°C.Mosfet gate drivers is recommended that you keep the supply current at 24mA in order to achieve greater stabilMosfet gate driversy.When the supply voltage is 24V, it is at its maximum operation.A supply voltage of 4.75V is the minimum value required to operate the device.500mA is the current that it outputs.A voltage of 20V should be set for the operating supply voltage.The input of this function is characterised by STANDARD.There is an output voltage of 24V for this device.
SN75372DG4 Features
2 drivers
8 pins
SN75372DG4 Applications
There are a lot of Texas Instruments SN75372DG4 gate drivers applications.
- Multicolor LED/laser displays
- Refrigerator
- Isolated Gate Driver Supplies
- Isolated Supplies for Motor Control
- Topologies
- Smart Phones
- LCD/LCoS/DLP portable and embedded pico projectors
- Uninterruptible Power Supplies (UPS)
- General Purpose 3-Phase Inverter
- Power factor correction (PFC) circuits
