SN75372P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V 4.75V~24V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75372 |
| Pin Count | 8 |
| Output Voltage | 23.2V |
| Max Output Current | 500mA |
| Operating Supply Voltage | 7V |
| Nominal Supply Current | 24mA |
| Power Dissipation | 1W |
| Output Current | 500mA |
| Max Supply Current | 24mA |
| Propagation Delay | 65 ns |
| Input Type | Inverting |
| Turn On Delay Time | 35 ps |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 20 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.065 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Supply Voltage1-Nom | 20V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 µs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75372P Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.A packaging method of Tube is indicated.2 drivers are incorporated for its configuration.In the direction of Through Hole, gate drivers is mounted.When the supply voltage is 4.75V~5.25V 4.75V~24V it is able to demonstrate its superiority.Gate type N-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of 0°C~70°C TA.A type of Inverting is used for input in this program.8 terminations constitute its foundation.Under its base part number SN75372, various related parts can be found.Mosfet driver is mounted using Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.The device is specifically designed to function with a supply voltage of 5V V.Its interface IC is NAND GATE BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 500mA.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.On the board, there are 8 component pins.The output current can be set to 500mA.According to its maximum power dissipation, 1W is capable of conducting and transferring a large amount of power without overheating.To ensure high stability, the supply current should be kept at 24mA.23.2V is the output voltage.A voltage of 7V should be set for the operating supply voltage.This function has an input of STANDARD.
SN75372P Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 1W
SN75372P Applications
There are a lot of Texas Instruments SN75372P gate drivers applications.
- Isolated Supplies for Motor Control
- Industrial motor drives - compact, standard, premium, servo drives
- 3-Phase Motor Inverter Driver
- Motor Control
- Motor Controls
- Portable Media Players
- Commercial and agricultural vehicles (CAV)
- Telecom switch mode power supplies
- A/D drivers
- Power factor correction (PFC) circuits
