SN75372PSRE4
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75372 |
| Pin Count | 8 |
| Output Voltage | 24V |
| Max Output Current | 500mA |
| Operating Supply Voltage | 20V |
| Nominal Supply Current | 24mA |
| Output Current | 500mA |
| Max Supply Current | 24mA |
| Propagation Delay | 65 ns |
| Input Type | Inverting |
| Turn On Delay Time | 65 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Input Characteristics | STANDARD |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.065 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Supply Voltage1-Nom | 20V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 µs |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 8 |
| Weight | 122.611688mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V 4.75V~24V |
| Terminal Position | DUAL |
SN75372PSRE4 Overview
There is greater flexibility with the 8-SOIC (0.209, 5.30mm Width) package.A package of Tape & Reel (TR) has been used.Configuration is based on 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a 4.75V~5.25V 4.75V~24V supply voltage, its superiority can be demonstrated.A gate type of N-Channel MOSFET has been used in its design.0°C~70°C TA is the allowed temperature range for this device.Inverting is used as its input type.It's configured with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number SN75372.In this case, Surface Mount indicates how the device is to be mounted.At the time of design, it is configured with 8 pins.Specification is for 5V supply voltage operation.Its interface IC is NAND GATE BASED MOSFET DRIVER.There is an output current limit of 500mA for this device.Several electronic components are included in its subcategory of MOSFET Drivers.The board has 8 component pins.This device is capable of delivering 500mA current.To maintain higher stability, the supply current should always be 24mA.When this voltage is produced, it is marked as 24V.Mosfet gate drivers is recommended that 20V be set as the operating supply voltage.Its input is characterized by the value STANDARD.
SN75372PSRE4 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
SN75372PSRE4 Applications
There are a lot of Texas Instruments SN75372PSRE4 gate drivers applications.
- DC-DC Converters
- Industrial motor drives - compact, standard, premium, servo drives
- Head-up and Head mounted displays
- Industrial Power Supplies
- Smart Phones
- Line drivers
- Motor Control
- Isolated Gate Driver Supplies
- Topologies
- Multicolor LED/laser displays
