SN75374DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~28V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | SN75374 |
| Pin Count | 16 |
| Operating Supply Voltage | 28V |
| Nominal Supply Current | 47mA |
| Max Supply Current | 47mA |
| Propagation Delay | 60 ns |
| Input Type | Inverting |
| Turn On Delay Time | 60 ns |
| Output Current-Max | 0.5A |
| Max Input Voltage | 5.5V |
| Output Characteristics | TOTEM-POLE |
| Turn-Off Delay Time | 30 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 4 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Supply Voltage1-Nom | 20V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75374DR Overview
There is greater flexibility with the 16-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Tape & Reel (TR).4 drivers are incorporated for its configuration.Gate drivers is mounted in the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.75V~28V supply voltage.A gate type of N-Channel MOSFET has been used in its design.In this device, temperatures must not exceed 0°C~150°C TJ.A type of Inverting is used for input in this program.Mosfet driver is based on 16 terminations.The base part number SN75374 refers to a number of related parts.Mosfet driver is mounted using the Surface Mount method.Devices have 16 pins available.The device is specifically designed to function with a supply voltage of 5V V.The interface chip of the system is NAND GATE BASED MOSFET DRIVER.There are various useful electronic components in its subcategory MOSFET Drivers.The number of component pins is 16.To increase stability, keep the supply current at 47mA.Mosfet gate drivers is recommended that the operating supply voltage be set to 28V.The input of this function is characterised by STANDARD.
SN75374DR Features
Embedded in the Tape & Reel (TR) package
4 drivers
Employing a gate type of N-Channel MOSFET
16 pins
SN75374DR Applications
There are a lot of Texas Instruments SN75374DR gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- Uninterruptible Power Supplies (UPS)
- Motor Controls
- Industrial Motor Inverter - Power Tools, Robotics
- Motor controllers
- High-voltage isolated DC-DC converters
- UPS systems
- Telecom switch mode power supplies
- Motor Control
- Dual-Battery Systems
