SN75374DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~28V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | SN75374 |
| Pin Count | 16 |
| Operating Supply Voltage | 28V |
| Nominal Supply Current | 47mA |
| Max Supply Current | 47mA |
| Propagation Delay | 60 ns |
| Input Type | Inverting |
| Turn On Delay Time | 60 ns |
| Output Current-Max | 0.5A |
| Max Input Voltage | 5.5V |
| Output Characteristics | TOTEM-POLE |
| Turn-Off Delay Time | 30 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 4 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Supply Voltage1-Nom | 20V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75374DRG4 Overview
For greater flexibility, its 16-SOIC (0.154, 3.90mm Width) package is used.Tape & Reel (TR) is the packaging method.Configuration is supported by 4 drivers.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a 4.75V~28V supply voltage, it can demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of 0°C~150°C TJ.Input type of Inverting is used.Initially, the configuration is composed of 16 terminations.There are various parts that can be found under its base part number SN75374.The mount method is Surface Mount.There are 16 pins available in the device.The device is specifically designed to operate at 5V volts.Its interface IC is NAND GATE BASED MOSFET DRIVER.There are various useful electronic components in its subcategory MOSFET Drivers.The board contains 16 pins for component connections.To increase stability, keep the supply current at 47mA.Setting the operating supply voltage to 28V is recommended.STANDARD represents its input.
SN75374DRG4 Features
Embedded in the Tape & Reel (TR) package
4 drivers
Employing a gate type of N-Channel MOSFET
16 pins
SN75374DRG4 Applications
There are a lot of Texas Instruments SN75374DRG4 gate drivers applications.
- Telecom switch mode power supplies
- Motor Controls
- RGB applications
- UPS systems
- Line drivers
- High power buffers
- LCD/LCoS/DLP portable and embedded pico projectors
- Industrial Modules
- Portable Media Players
- High frequency line drivers
