banner_page

SN75374N

Through Hole Tube Active EAR99 Gate Drivers ICs Inverting 16-DIP (0.300, 7.62mm) SN75374 Low-Side


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN75374N
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 935
  • Description: Through Hole Tube Active EAR99 Gate Drivers ICs Inverting 16-DIP (0.300, 7.62mm) SN75374 Low-Side (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount, Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Weight 951.693491mg
Operating Temperature 0°C~150°C TJ
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory MOSFET Drivers
Technology BIPOLAR
Voltage - Supply 4.75V~28V
Terminal Position DUAL
Number of Functions 4
Supply Voltage 5V
Base Part Number SN75374
Pin Count 16
Number of Outputs 4
Output Voltage 24V
Max Output Current 500mA
Nominal Supply Current 47mA
Output Current 500mA
Propagation Delay 60 ns
Input Type Inverting
Turn On Delay Time 60 ns
Max Input Voltage 5.5V
Output Characteristics TOTEM-POLE
Turn-Off Delay Time 30 ns
Output Polarity INVERTED
Input Characteristics STANDARD
Rise / Fall Time (Typ) 20ns 20ns
Interface IC Type NAND GATE BASED MOSFET DRIVER
Channel Type Independent
Turn On Time 0.06 µs
Output Peak Current Limit-Nom 0.5A
Supply Voltage1-Nom 20V
Driven Configuration Low-Side
Gate Type N-Channel MOSFET
Current - Peak Output (Source, Sink) 500mA 500mA
High Side Driver YES
Logic Voltage - VIL, VIH 0.8V 2V
Turn Off Time 0.05 µs
Height 5.08mm
Length 19.3mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN75374N Overview


For greater flexibility, the 16-DIP (0.300, 7.62mm) package is adopted.Tube is the form of the package.It's mounted on the way to Through Hole.When the supply voltage is set to 4.75V~28V, it can demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.The allowable temperature range that this device can be operated in is 0°C~150°C TJ.A type of Inverting is used for input in this program.As a result of its configuration, it contains a maximum of 16 terminations.There are various related parts under its base part number SN75374.The device is mounted using Surface Mount, Through Hole.During design, it is configured with 16 pins.A voltage of 5V is required for its operation.Mosfet driver employs an interface chip called NAND GATE BASED MOSFET DRIVER as Mosfet drivers interface chip.Mosfet driver is possible for the output current to be as low as 500mA.There are several useful electronic components found in its subcategory of MOSFET Drivers.16 pins are present on the component.The basis of this model has 4 outputs integrated.500mA is the maximum output current supported by the device.A voltage of 24V is output by this device.The input of this function is characterised by STANDARD.

SN75374N Features


Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
16 pins

SN75374N Applications


There are a lot of Texas Instruments SN75374N gate drivers applications.

  • Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
  • Topologies
  • Motor controllers
  • High power buffers
  • Pulse transformer drivers
  • Power factor correction (PFC) circuits
  • Motor Drives
  • Refrigerator
  • Smart Phones
  • Portable computers

Write a review

Note: HTML is not translated!
    Bad           Good