SN75451BDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75451 |
| Pin Count | 8 |
| Output Voltage | 30V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 65mA |
| Power Dissipation | 725mW |
| Output Current | 300mA |
| Max Supply Current | 65mA |
| Propagation Delay | 25 ns |
| Input Type | Inverting |
| Turn On Delay Time | 8 ns |
| Max Input Voltage | 5.5V |
| Output Characteristics | STANDARD |
| Turn-Off Delay Time | 12 ns |
| Output Polarity | TRUE |
| Input Characteristics | GATED |
| Rise / Fall Time (Typ) | 5ns 7ns |
| Interface IC Type | AND GATE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75451BDR Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.There is a package in the form of Cut Tape (CT).For its configuration, it incorporates 2 drivers.Surface Mount is the way in which it is mounted.A supply voltage of 4.75V~5.25V demonstrates its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel, P-Channel MOSFET.Temperature range 0°C~70°C TA is allowed for this device.A type of Inverting is used for input in this program.It's configured with 8 terminations.There are various parts that can be found under its base part number SN75451.The device is mounted with Surface Mount.At the time of design, it is configured with 8 pins.Specification is for 5V supply voltage operation.Mosfet driver employs an interface chip called AND GATE BASED PERIPHERAL DRIVER as Mosfet drivers interface chip.Several electronic components are included in its subcategory of Peripheral Drivers.On the board, there are 8 component pins.300mA is the maximum output current supported by the device.Having the maximum power dissipation of 725mW indicates its maximum capacity to conduct power losses without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 65mA.Using its power supply of 5V, it provides solutions to diverse power supply problems.In this case, it outputs 30V voltage.Mosfet gate drivers is recommended that 5V be set as the operating supply voltage.Mosfet gate drivers receives an input of GATED.
SN75451BDR Features
Embedded in the Cut Tape (CT) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 725mW
SN75451BDR Applications
There are a lot of Texas Instruments SN75451BDR gate drivers applications.
- High-voltage isolated DC-DC converters
- UPS systems
- A/D drivers
- Telecom switch mode power supplies
- Line drivers
- White Goods - Air Conditioner, Washing Machine,
- Refrigerator
- Power factor correction (PFC) circuits
- High-speed communications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
