SN75451BDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75451 |
| Pin Count | 8 |
| Output Voltage | 30V |
| Operating Supply Voltage | 5.25V |
| Power Supplies | 5V |
| Nominal Supply Current | 65mA |
| Power Dissipation | 725mW |
| Output Current | 300mA |
| Max Supply Current | 65mA |
| Propagation Delay | 25 ns |
| Input Type | Inverting |
| Turn On Delay Time | 8 ns |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-COLLECTOR |
| Turn-Off Delay Time | 12 ns |
| Output Polarity | TRUE |
| Input Characteristics | GATED |
| Rise / Fall Time (Typ) | 5ns 7ns |
| Interface IC Type | AND GATE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75451BDRG4 Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the package.The configuration is supported by 2 drivers.In the direction of Surface Mount, gate drivers is mounted.When the supply voltage is set to 4.75V~5.25V, it can demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.This device is allowed to operate in a temperature range of 0°C~70°C TA.A type of Inverting is used for input in this program.Initially, the configuration is composed of 8 terminations.There are numerous related parts listed under its base part number SN75451.Mosfet driver is mounted using Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.The device is specifically designed to function with a supply voltage of 5V V.The interface chip of the system is AND GATE BASED PERIPHERAL DRIVER.Its subcategory of Peripheral Drivers contains various useful electronic components.Components with 8 pins are available.This device supports a current output of 300mA at the output.The maximum power dissipation of 725mW shows its maximum capability to transfer and conduct power loss without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 65mA.Due to its 5V power supply, it can solve power supply problems for an array of diverse applications.In this case, the voltage output is 30V.As a rule of thumb, the operating supply voltage should be set to 5.25V.Mosfet gate drivers receives an input of GATED.
SN75451BDRG4 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 725mW
SN75451BDRG4 Applications
There are a lot of Texas Instruments SN75451BDRG4 gate drivers applications.
- DC/DC converters
- Telecom switch mode power supplies
- Dual-Battery Systems
- Motor Controls
- Commercial and agricultural vehicles (CAV)
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Video amplifiers
- Industrial Motor Inverter - Power Tools, Robotics
- A/D drivers
- General Purpose 3-Phase Inverter
