SN75451BPSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 8 |
| Weight | 122.611688mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75451 |
| Pin Count | 8 |
| Output Voltage | 30V |
| Operating Supply Voltage | 5.25V |
| Power Supplies | 5V |
| Nominal Supply Current | 65mA |
| Output Current | 300mA |
| Propagation Delay | 25 ns |
| Input Type | Inverting |
| Turn On Delay Time | 8 ns |
| Output Characteristics | OPEN-COLLECTOR |
| Turn-Off Delay Time | 12 ns |
| Output Polarity | TRUE |
| Input Characteristics | GATED |
| Rise / Fall Time (Typ) | 5ns 7ns |
| Interface IC Type | AND GATE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75451BPSR Overview
Its 8-SOIC (0.209, 5.30mm Width) package is adopted for higher flexibility.A packaging method of Cut Tape (CT) is used.This device is equipped with 2 drivers for its configuration.In the direction of Surface Mount, gate drivers is mounted.Using a 4.75V~5.25V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type N-Channel, P-Channel MOSFET is designed for it.For this device, the temperature range is 0°C~70°C TA.A type of Inverting is used for input in this program.It's configured with 8 terminations.Numerous related parts are available for its base part number SN75451.Surface Mount is the way it takes to mount the device.As a result, it is configured with 8 pins when it is designed.With a supply voltage of 5V, it is designed to operate.The interface IC of the device is AND GATE BASED PERIPHERAL DRIVER.There are various useful electronic components in its subcategory Peripheral Drivers.The number of component pins is 8.An output current of 300mA is supported.Using its power supply of 5V, it provides solutions to diverse power supply problems.Mosfet gate drivers outputs 30V as voltage.Mosfet gate drivers is recommended that the operating supply voltage be set to 5.25V volts.A GATED character describes its input.
SN75451BPSR Features
Embedded in the Cut Tape (CT) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
SN75451BPSR Applications
There are a lot of Texas Instruments SN75451BPSR gate drivers applications.
- Commercial air-conditioning (CAC)
- PCMCIA applications
- Portable Media Players
- Isolated Supplies for controller area network (CAN),
- Automotive Applications
- DC/DC converters
- Power factor correction (PFC) circuits
- RGB applications
- Telecom switch mode power supplies
- Refrigerator
