Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 16 hours ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
725mW |
Technology |
BIPOLAR |
Voltage - Supply |
4.75V~5.25V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
SN75452 |
Pin Count |
8 |
Number of Outputs |
2 |
Output Voltage |
30V |
Max Output Current |
500mA |
Power Supplies |
5V |
Nominal Supply Current |
71mA |
Power Dissipation |
725mW |
Output Current |
100μA |
Max Supply Current |
71mA |
Propagation Delay |
35 ns |
Input Type |
Non-Inverting |
Turn On Delay Time |
8 ns |
Max Input Voltage |
5.5V |
Output Characteristics |
OPEN-COLLECTOR |
Turn-Off Delay Time |
12 ns |
Output Polarity |
INVERTED |
Input Characteristics |
STANDARD |
Rise / Fall Time (Typ) |
5ns 7ns |
Interface IC Type |
NAND GATE BASED PERIPHERAL DRIVER |
Driver Number of Bits |
2 |
Channel Type |
Independent |
Turn On Time |
0.035 µs |
Output Peak Current Limit-Nom |
0.5A |
Driven Configuration |
Low-Side |
Gate Type |
N-Channel, P-Channel MOSFET |
Current - Peak Output (Source, Sink) |
500mA 500mA |
Logic Voltage - VIL, VIH |
0.8V 2V |
Turn Off Time |
0.035 µs |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN75452BD Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.The packaging method is indicated by Tube.Ideally, it should be mounted in the direction of Surface Mount.By using 4.75V~5.25V supply voltage, it is able to demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.This device can operate at temperatures up to 0°C~70°C TA.Input type of Non-Inverting is used.As a result of its configuration, it contains a maximum of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number SN75452.Mosfet driver is mounted using the Surface Mount method.There are 8 pins available in the device.With a supply voltage of 5V, it is designed to operate.There is an interface IC called NAND GATE BASED PERIPHERAL DRIVER that is employed in this device.As a maximum, there is 500mA limit to the output current.The subcategory of Peripheral Drivers contains a wide variety of useful electronic components.On the board, there are 8 component pins.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.Mosfet gate drivers supports a current output of 100μA.Its maximum power dissipation of 725mW also demonstrates its maximum ability to transfer power without overheating.To maintain higher stability, the supply current should always be 71mA.The power supply 5V of the product solves the power supply problem for a variety of applications.Mosfet gate drivers produces a voltage of 30V.The input of this function is characterised by STANDARD.
SN75452BD Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 725mW
SN75452BD Applications
There are a lot of Texas Instruments SN75452BD gate drivers applications.
- Multicolor LED/laser displays
- Portable Media Players
- Digitally controlled power supplies
- High frequency line drivers
- High power buffers
- Line drivers
- Industrial Modules
- Isolated Gate Driver Supplies
- High-voltage isolated DC-DC converters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,