SN75452BDE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75452 |
| Pin Count | 8 |
| Output Voltage | 30V |
| Operating Supply Voltage | 5.25V |
| Power Supplies | 5V |
| Nominal Supply Current | 71mA |
| Power Dissipation | 725mW |
| Output Current | 300mA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 8 ns |
| Output Characteristics | OPEN-COLLECTOR |
| Turn-Off Delay Time | 12 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 5ns 7ns |
| Interface IC Type | NAND GATE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.035 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.035 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75452BDE4 Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Tube is the form of the package.For its configuration, it incorporates 2 drivers.It's mounted on the way to Surface Mount.When the supply voltage is set to 4.75V~5.25V, it can demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.This device is allowed to operate in a temperature range of 0°C~70°C TA.This program uses the input type of Non-Inverting.8 terminations constitute its foundation.You will find various related parts under the base part number SN75452.Mounting the device requires Surface Mount.Devices have 8 pins available.Mosfet driver is designed specifically to run on 5V volts of power.There is an interface IC called NAND GATE BASED PERIPHERAL DRIVER that is employed in this device.Within this subcategory of Peripheral Drivers, there are several useful electronic components.There are 8 component pins on the board.The output current can be set to 300mA.Its maximum power dissipation of 725mW also demonstrates its maximum ability to transfer power without overheating.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 5V.As a result, a voltage of 30V is produced.Mosfet gate drivers is recommended that you set the operating supply voltage to 5.25V.The input of this function is characterised by STANDARD.
SN75452BDE4 Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 725mW
SN75452BDE4 Applications
There are a lot of Texas Instruments SN75452BDE4 gate drivers applications.
- AC-DC Inverters
- Commercial and agricultural vehicles (CAV)
- Refrigerator
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Dual-Battery Systems
- Smart Phones
- LCD/LCoS/DLP portable and embedded pico projectors
- A/D drivers
- Topologies
- DC/DC converters
