SN75452BDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75452 |
| Pin Count | 8 |
| Output Voltage | 30V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 71mA |
| Power Dissipation | 725mW |
| Output Current | 300mA |
| Max Supply Current | 71mA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 8 ns |
| Max Input Voltage | 5.5V |
| Output Characteristics | STANDARD |
| Turn-Off Delay Time | 12 ns |
| Output Polarity | INVERTED |
| Input Characteristics | GATED |
| Rise / Fall Time (Typ) | 5ns 7ns |
| Interface IC Type | NAND GATE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.035 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.035 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75452BDR Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Cut Tape (CT) is used.For its configuration, it incorporates 2 drivers.Surface Mount is mounted in the way of the device.When the supply voltage is set to 4.75V~5.25V, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device allows temperatures in the range of 0°C~70°C TA.Non-Inverting is used as the input type in this program.It's configured with 8 terminations.Under its base part number SN75452, various related parts can be found.The device is mounted with Surface Mount.At the time of design, it is configured with 8 pins.A supply voltage of 5V is required for operation.The interface chip of the system is NAND GATE BASED PERIPHERAL DRIVER.There are various useful electronic components in its subcategory Peripheral Drivers.A board with 8 component pins is available.This device supports a current output of 300mA at the output.Its maximum power dissipation of 725mW shows its power loss capacity without overheating.If you want a stable supply current, you should keep it at 71mA.Due to its 5V power supply, it can solve power supply problems for an array of diverse applications.In this case, it produces a voltage of 30V.The operating supply voltage should be set at 5V.Its input is characterized by GATED.
SN75452BDR Features
Embedded in the Cut Tape (CT) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 725mW
SN75452BDR Applications
There are a lot of Texas Instruments SN75452BDR gate drivers applications.
- Welding
- Digitally controlled power supplies
- Uninterruptible Power Supplies (UPS)
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- High-voltage isolated DC-DC converters
- Commercial air-conditioning (CAC)
- Motor Control
- Portable computers
- Industrial motor drives - compact, standard, premium, servo drives
- Motor controllers
