SN75452BDRE4
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75452 |
| Pin Count | 8 |
| Output Voltage | 30V |
| Operating Supply Voltage | 5.25V |
| Power Supplies | 5V |
| Nominal Supply Current | 71mA |
| Power Dissipation | 725mW |
| Output Current | 300mA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Output Characteristics | OPEN-COLLECTOR |
| Turn-Off Delay Time | 12 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 5ns 7ns |
| Interface IC Type | NAND GATE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.035 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.035 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
SN75452BDRE4 Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tape & Reel (TR) is used.Configuration is based on 2 drivers.Surface Mount is mounted in the way.In the absence of a power supply voltage of 4.75V~5.25V V, it is able to demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as 0°C~70°C TA.The input type is Non-Inverting.The configuration starts with 8 terminations.You will find various related parts under the base part number SN75452.In this case, Surface Mount indicates how the device is mounted.In the device, there are 8 pins.A voltage of 5V is required for its operation.There is an interface IC called NAND GATE BASED PERIPHERAL DRIVER that is employed in this device.This subcategory of Peripheral Drivers has a number of useful electronic components.A total of 8 pins are available for component connections.The output current can be set to 300mA.This device has a maximum power dissipation of 725mW, indicating that it is capable of reducing power loss without overheating.With its power supplies of 5V, it solves the power supply problems for diverse applications.In this case, it outputs 30V voltage.In order to operate properly, the operating supply voltage should be set to 5.25V.The input is characterized by STANDARD.
SN75452BDRE4 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 725mW
SN75452BDRE4 Applications
There are a lot of Texas Instruments SN75452BDRE4 gate drivers applications.
- UPS systems
- RGB applications
- DC-DC Converters
- Pulse transformer drivers
- Digitally controlled power supplies
- Motor controllers
- White Goods - Air Conditioner, Washing Machine,
- Line drivers
- High-voltage isolated DC-DC converters
- High current laser/LED systems
