SN75452BP
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75452 |
| Pin Count | 8 |
| Output Voltage | 30V |
| Power Supplies | 5V |
| Nominal Supply Current | 71mA |
| Power Dissipation | 1W |
| Output Current | 300mA |
| Max Supply Current | 71mA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 8 ns |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-COLLECTOR |
| Turn-Off Delay Time | 12 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 5ns 7ns |
| Interface IC Type | NAND GATE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.035 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.035 µs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
SN75452BP Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.Tube is the form of the package.Gate drivers is configured wGate driversh 2 drivers.In this case, gate drivers is mounted along the way of Through Hole.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.75V~5.25V.The gate type on this device is N-Channel, P-Channel MOSFET.This device can operate at temperatures up to 0°C~70°C TA.Input type of Non-Inverting is used.The configuration starts with 8 terminations.The base part number SN75452 refers to a number of related parts.The device is mounted using Through Hole.Devices have 8 pins available.Mosfet driver is designed specifically to run on 5V volts of power.Mosfet driver employs an interface chip called NAND GATE BASED PERIPHERAL DRIVER as Mosfet drivers interface chip.There are several useful electronic components in this subcategory of Peripheral Drivers.The component has 8 pins.An output current of 300mA is supported.Based on the maximum power dissipation of 1W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Mosfet gate drivers is recommended to keep the supply current at 71mA to ensure greater stabilMosfet gate driversy.Due to its power supplies of 5V, it solves the power supply problem for a wide range of applications.In this case, it produces a voltage of 30V.The input of this function is characterised by STANDARD.
SN75452BP Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1W
SN75452BP Applications
There are a lot of Texas Instruments SN75452BP gate drivers applications.
- Topologies
- RGB applications
- Active filtering
- Smart Phones
- DC/DC converters
- General Purpose 3-Phase Inverter
- Telecom switch mode power supplies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- High current laser/LED systems
- Pulse transformer drivers
