SN75453BD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75453 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 30V |
| Max Output Current | 500mA |
| Power Supplies | 5V |
| Nominal Supply Current | 68mA |
| Power Dissipation | 725mW |
| Output Current | 300mA |
| Max Supply Current | 68mA |
| Propagation Delay | 25 ns |
| Input Type | Inverting |
| Turn On Delay Time | 8 ns |
| Max Input Voltage | 5.5V |
| Output Characteristics | STANDARD |
| Turn-Off Delay Time | 12 ns |
| Output Polarity | TRUE |
| Input Characteristics | GATED |
| Rise / Fall Time (Typ) | 5ns 7ns |
| Interface IC Type | OR GATE BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75453BD Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A packaging method of Tube is indicated.Surface Mount is mounted in the way.By using 4.75V~5.25V supply voltage, it is able to demonstrate its superiority.N-Channel, P-Channel MOSFET is the gate type used for this design.There is a temperature range for this device of 0°C~70°C TA.This program uses the input type of Inverting.Initially, the configuration is composed of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number SN75453.The device is mounted using Surface Mount.The pins are configured with 8 when designing the chip.Mosfet driver is designed specifically to run on 5V volts of power.There is an interface IC called OR GATE BASED PERIPHERAL DRIVER that is employed in this device.There is a maximum output current of 500mA.The subcategory of Peripheral Drivers contains a wide variety of useful electronic components.The number of component pins is 8.For its basis, there are 2 outputs integrated.An output current of 300mA is supported.The maximum power dissipation of 725mW shows its maximum capability to transfer and conduct power loss without overheating.For higher stability, the supply current should be kept at 68mA.With its power supplies of 5V, it solves the power supply problems for diverse applications.The voltage it outputs is 30V.GATED is its input.
SN75453BD Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 725mW
SN75453BD Applications
There are a lot of Texas Instruments SN75453BD gate drivers applications.
- Line drivers
- Uninterruptible Power Supplies (UPS)
- Motor controllers
- Pulse transformer drivers
- Automotive Applications
- Isolated Supplies for controller area network (CAN),
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- PCMCIA applications
- High frequency line drivers
- Industrial Modules
