SN75453BDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75453 |
| Pin Count | 8 |
| Output Voltage | 30V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 68mA |
| Power Dissipation | 725mW |
| Output Current | 300mA |
| Max Supply Current | 68mA |
| Propagation Delay | 25 ns |
| Input Type | Inverting |
| Turn On Delay Time | 8 ns |
| Max Input Voltage | 5.5V |
| Output Characteristics | STANDARD |
| Turn-Off Delay Time | 12 ns |
| Output Polarity | TRUE |
| Input Characteristics | GATED |
| Rise / Fall Time (Typ) | 5ns 7ns |
| Interface IC Type | OR GATE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75453BDR Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Gate drivers is package in Tape & Reel (TR) case.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Ideally, it should be mounted in the direction of Surface Mount.A supply voltage of 4.75V~5.25V demonstrates its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device allows temperatures in the range of 0°C~70°C TA.Input type of Inverting is used.Initially, the configuration is composed of 8 terminations.Numerous related parts can be found under its base part number SN75453.Mounting the device requires Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver is designed specifically to run on 5V volts of power.Its interface IC is OR GATE BASED PERIPHERAL DRIVER.There are several useful electronic components found in its subcategory of Peripheral Drivers.The board has 8 component pins.300mA is the maximum output current supported by the device.According to its maximum power dissipation, 725mW is capable of conducting and transferring a large amount of power without overheating.As a precaution, make sure the supply current is kept at 68mA.Due to its power supply of 5V, it provides an effective solution to power supply problems for a wide range of applications.In this case, the voltage is 30V.Mosfet gate drivers is recommended that the operating supply voltage be set to 5V.Mosfet gate drivers receives an input of GATED.
SN75453BDR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 725mW
SN75453BDR Applications
There are a lot of Texas Instruments SN75453BDR gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Dual-Battery Systems
- Topologies
- LCD/LCoS/DLP portable and embedded pico projectors
- Automotive Applications
- A/D drivers
- Uninterruptible Power Supplies (UPS)
- Portable computers
- White Goods - Air Conditioner, Washing Machine,
- Smart Phones
