SN75453BDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75453 |
| Pin Count | 8 |
| Output Voltage | 30V |
| Operating Supply Voltage | 5.25V |
| Power Supplies | 5V |
| Nominal Supply Current | 68mA |
| Power Dissipation | 725mW |
| Output Current | 300mA |
| Max Supply Current | 68mA |
| Propagation Delay | 25 ns |
| Input Type | Inverting |
| Turn On Delay Time | 8 ns |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-COLLECTOR |
| Turn-Off Delay Time | 12 ns |
| Output Polarity | TRUE |
| Input Characteristics | GATED |
| Rise / Fall Time (Typ) | 5ns 7ns |
| Interface IC Type | OR GATE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75453BDRG4 Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.The packaging method is indicated by Tape & Reel (TR).A total of 2 drivers are integrated into its configuration.Its recommended mounting way is Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.75V~5.25V supply voltage.This device is designed with a N-Channel, P-Channel MOSFET gate type.The allowable temperature range that this device can be operated in is 0°C~70°C TA.Inverting is used as its input type.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Numerous related parts are available for its base part number SN75453.The device is mounted using Surface Mount.During design, it is configured with 8 pins.Mosfet driver is designed specifically to run on 5V volts of power.The interface chip of the system is OR GATE BASED PERIPHERAL DRIVER.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of Peripheral Drivers.The board has 8 component pins.The device is capable of delivering a current of 300mA.Using 725mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.As a precaution, make sure the supply current is kept at 68mA.With its power supplies of 5V, it solves the power supply problems for diverse applications.In this case, the voltage is 30V.In order to operate properly, the operating supply voltage should be set to 5.25V.The input is characterized by GATED.
SN75453BDRG4 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 725mW
SN75453BDRG4 Applications
There are a lot of Texas Instruments SN75453BDRG4 gate drivers applications.
- High power buffers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- General Purpose 3-Phase Inverter
- Automotive Applications
- DC-DC Converters
- Active filtering
- Motor controllers
- Isolated Supplies for controller area network (CAN),
- Commercial air-conditioning (CAC)
- Industrial Power Supplies
