SN75453BP
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75453 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 30V |
| Power Supplies | 5V |
| Nominal Supply Current | 68mA |
| Power Dissipation | 1W |
| Output Current | 100μA |
| Propagation Delay | 25 ns |
| Input Type | Inverting |
| Turn On Delay Time | 25 ns |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-COLLECTOR |
| Turn-Off Delay Time | 12 ns |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 5ns 7ns |
| Interface IC Type | OR GATE BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
SN75453BP Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Gate drivers is packaged in the way of Tube.In this case, gate drivers is mounted along the way of Through Hole.In the absence of a power supply voltage of 4.75V~5.25V V, it is able to demonstrate its superiority.This device is designed with a N-Channel, P-Channel MOSFET gate type.Mosfet driver is possible to use this device at temperatures as low as 0°C~70°C TA.Input type of Inverting is used.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.The base part number SN75453 refers to a number of related parts.You mount it with Through Hole.There are 8 pins available in the device.Mosfet driver is designed specifically to run on 5V volts of power.OR GATE BASED PERIPHERAL DRIVER is employed as its interface IC.There are several useful electronic components within its subcategory Peripheral Drivers.8 pins are present on the component.For its basis, 2 outputs are integrated.Mosfet gate drivers supports a current output of 100μA.Using 1W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Due to its power supplies of 5V, it solves the power supply problem for a wide range of applications.A voltage of 30V is output by this device.Mosfet gate drivers receives an input of STANDARD.
SN75453BP Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1W
SN75453BP Applications
There are a lot of Texas Instruments SN75453BP gate drivers applications.
- RGB applications
- Industrial motor drives - compact, standard, premium, servo drives
- Portable computers
- Solar inverters
- Automotive Applications
- A/D drivers
- LCD/LCoS/DLP portable and embedded pico projectors
- Motor Control
- Digitally controlled power supplies
- High-voltage isolated DC-DC converters
