SN75477D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75477 |
| Pin Count | 8 |
| Output Voltage | 100V |
| Power Supplies | 5V |
| Nominal Supply Current | 75mA |
| Power Dissipation | 725mW |
| Output Current | 300mA |
| Propagation Delay | 350 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 350 ns |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-COLLECTOR |
| Turn-Off Delay Time | 125 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 50ns 90ns |
| Interface IC Type | NAND GATE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.35 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.35 µs |
| Built-in Protections | TRANSIENT |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75477D Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.A packaging method of Tube is indicated.This device is equipped with 2 drivers for its configuration.The device is mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~5.5V.This device can operate at temperatures up to 0°C~70°C TA.Non-Inverting is the input type used in this program.As a result of its configuration, it contains a maximum of 8 terminations.There are various related parts under its base part number SN75477.The device is mounted with Surface Mount.When designing, the device is configured with 8 pins.This device operates with 5V supply voltage.Mosfet driver is equipped wMosfet driverh an interface chip NAND GATE BASED PERIPHERAL DRIVER.Its subcategory of Peripheral Drivers contains various useful electronic components.Components with 8 pins are available.The device is capable of delivering a current of 300mA.Considering its maximum power dissipation, 725mW shows its maximum capacity to transfer and conduct power loss without overheating.The power supply 5V of the product solves the power supply problem for a variety of applications.In this case, the voltage output is 100V.The gate driver is part of the Automotive, AEC-Q100 series.The input of this function is characterised by STANDARD.
SN75477D Features
Embedded in the Tube package
2 drivers
8 pins
Maximum power dissipation of 725mW
Operating with the supply voltage of Automotive, AEC-Q100
SN75477D Applications
There are a lot of Texas Instruments SN75477D gate drivers applications.
- Telecom switch mode power supplies
- DC-DC Converters
- Portable Navigation Devices
- Refrigerator
- serial peripheral interface (SPI), I2C
- General Purpose 3-Phase Inverter
- A/D drivers
- Motor controllers
- Industrial motor drives - compact, standard, premium, servo drives
- Portable computers
