SN75477DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75477 |
| Pin Count | 8 |
| Output Voltage | 100V |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Nominal Supply Current | 75mA |
| Power Dissipation | 725mW |
| Output Current | 300mA |
| Max Supply Current | 75mA |
| Propagation Delay | 350 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 125 ns |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-COLLECTOR |
| Turn-Off Delay Time | 125 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 50ns 90ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.35 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.35 µs |
| Built-in Protections | TRANSIENT |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
SN75477DG4 Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.The packaging method is indicated by Tube.Configuration is based on 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is set to 4.5V~5.5V, it can demonstrate its superiority.This device is allowed to operate in a temperature range of 0°C~70°C TA.The input type for this program is Non-Inverting.There are 8 terminations to form the base of its configuration.Under its base part number SN75477, various related parts can be found.Mosfet driver is mounted using the Surface Mount method.As a result, it is configured with 8 pins when it is designed.The device is specifically designed to operate at 5V volts.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED PERIPHERAL DRIVER.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of Peripheral Drivers.The board has 8 component pins.This device supports a current output of 300mA at the output.725mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.The supply current should be kept at 75mA to ensure higher stability.With its 5V power supply, it provides power for diverse applications.As a result, a voltage of 100V is produced.Mosfet gate drivers is recommended that the operating supply voltage be set to 5.5V volts.A gate driver in the Automotive, AEC-Q100 series is included in this document.STANDARD represents its input.
SN75477DG4 Features
Embedded in the Tube package
2 drivers
8 pins
Maximum power dissipation of 725mW
Operating with the supply voltage of Automotive, AEC-Q100
SN75477DG4 Applications
There are a lot of Texas Instruments SN75477DG4 gate drivers applications.
- Industrial motor drives - compact, standard, premium, servo drives
- DC-DC Converters
- UPS systems
- Smart Phones
- Welding
- Dual-Battery Systems
- Multicolor LED/laser displays
- A/D drivers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- RGB applications
