SN75477P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75477 |
| Pin Count | 8 |
| Output Voltage | 100V |
| Power Supplies | 5V |
| Nominal Supply Current | 75mA |
| Power Dissipation | 1W |
| Output Current | 100μA |
| Max Supply Current | 75mA |
| Propagation Delay | 350 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 125 ns |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-COLLECTOR |
| Turn-Off Delay Time | 125 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 50ns 90ns |
| Interface IC Type | NAND GATE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.35 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.35 µs |
| Built-in Protections | TRANSIENT |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75477P Overview
There is greater flexibility with the 8-DIP (0.300, 7.62mm) package.Tube represents the package.Configuration is based on 2 drivers.Ideally, it should be mounted in the direction of Through Hole.By using 4.5V~5.5V supply voltage, it is able to demonstrate its superiority.This device allows temperatures in the range of 0°C~70°C TA.Mosfet driver accepts input of type Non-Inverting.Its configuration starts with 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number SN75477.You mount it with Through Hole.During design, it is configured with 8 pins.In order to operate, a voltage of 5V has to be applied.The interface IC is referred to as NAND GATE BASED PERIPHERAL DRIVER.In this subcategory of Peripheral Drivers, there are numerous useful electronic components.The board has a total of 8 component pins.An output current of 100μA is supported.Based on its maximum power dissipation of 1W, it is clear that it is capable of transferring and conducting power loss without overheating.To maintain higher stability, the supply current should always be 75mA.With its power supplies of 5V, it solves the power supply problems for diverse applications.When this voltage is produced, it is marked as 100V.A gate driver in the Automotive, AEC-Q100 series is included in this document.STANDARD represents its input.
SN75477P Features
Embedded in the Tube package
2 drivers
8 pins
Maximum power dissipation of 1W
Operating with the supply voltage of Automotive, AEC-Q100
SN75477P Applications
There are a lot of Texas Instruments SN75477P gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- High current laser/LED systems
- High-speed communications
- Pulse transformer drivers
- Motor Controls
- Industrial motor drives - compact, standard, premium, servo drives
- General Purpose 3-Phase Inverter
- Industrial Modules
- High frequency line drivers
- A/D drivers
