SN75ALS1177N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 75ALS1177 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 50mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Receive Delay-Max | 37 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75ALS1177N Overview
This driver chip is excellent for driving common LEDs due to its enhanced 16-DIP (0.300, 7.62mm) package.In this package, the receiver is mounted in the Tube format.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.A Through Hole-type PCB or development board can be used to place this wide receiver.This differential driver requires a 4.75V~5.25V power supply.This electronic part can have?up to 2/2 eligible receivers/drivers on the field at once.?In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.With a supply voltage range of 5V, this line driver ic operates efficiently.For driving and receiving signals from data, this wide receiver has 16 terminations integrated.The pinouts for this transceiver are standardized to meet the needs of the market.This part number 75ALS1177 can be used to search for more variants based on the product type, temperature, package, etc.The driver IC has improved power dissipation control.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.There is a subcategory named Line Driver or Receivers for this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.There are 1 transceivers in total that this module isolated transceiver implements.The part is embedded with 2 drivers, so it can be used with 2 devices.
SN75ALS1177N Features
Tube package
16 pin count
16 pins
5V power supply
SN75ALS1177N Applications
There are a lot of Texas Instruments SN75ALS1177N Drivers/Receivers/Transceivers applications.
- Radio transmission
- Precision engineering measurement
- Long-distance fiber optic network applications
- interconnection between computers
- VoIP phones
- Satellite communications networks
- Single to Multimode Fiber Conversion
- Home theater wiring-free
- Interconnection between switches and computers
- Wireless projection application for business talks
