SN75ALS1177NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 75ALS1177 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 50mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10 Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Receive Delay-Max | 37 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75ALS1177NSR Overview
LED drivers benefit from this IC's enhanced 16-SOIC (0.209, 5.30mm Width) package.The package of this receiver is Cut Tape (CT).Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.In terms of power supply, this differential driver utilizes 4.75V~5.25V.At any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are 0°C~70°C.With a voltage range of 5V, this driver IC can operate efficiently.Wide receiver has 16 terminations built in for driving or receiving signals from data.It is packaged with 16 pinouts that are market standard for this particular transceiver.75ALS1177 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control is provided by this 16-pin driver IC.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There is a 5V input voltage supply that can be used to operate this transceiver module.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.This IC implements 1 transceivers overall.The integrator circuit comes with embedded 2 drivers.
SN75ALS1177NSR Features
Cut Tape (CT) package
16 pin count
16 pins
5V power supply
SN75ALS1177NSR Applications
There are a lot of Texas Instruments SN75ALS1177NSR Drivers/Receivers/Transceivers applications.
- Wireless projection application for business talks
- Bridges
- Copper connection network
- IPTV front end
- Wireless transmission
- Wireless multimedia center in smart home
- Wireless 3D game
- Gigabit Ethernet
- Notebook
- Switching system
