SN75ALS1178N
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 75ALS1178 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 50mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Receive Delay-Max | 37 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
SN75ALS1178N Overview
LED drivers with the enhanced 16-DIP (0.300, 7.62mm) package will be able to drive a variety of common LEDs with ease.In this package, the receiver is mounted in the Tube format.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.Any Through Hole-type PCB or development board can be used with this wide receiver.It takes 4.75V~5.25V from the power supply to run this differential driver.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.IC receiver is designed for applications with a temperature of 0°C~70°C.With a voltage range of 5V, this driver IC can operate efficiently.Integrated into this wide receiver are 16 terminations that are used for driving and receiving signals from data.There are 16 pinouts available on this transceiver which are market standard.With the part number 75ALS1178 identifying the product type, temperature, package, etc., you can search with it to see more variants.The driver IC has improved power dissipation control.Package size is drastically reduced by downsizing ICs and mounting them in high-density Through Hole arrays.This receiver is typically specified with a resolution of 2 bits. This transceiver module is designed to operate from an input voltage supply of 5V.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.There are 1 transceivers in total that this module isolated transceiver implements.The integrator circuit has embedded 2 drivers.
SN75ALS1178N Features
Tube package
16 pin count
16 pins
5V power supply
SN75ALS1178N Applications
There are a lot of Texas Instruments SN75ALS1178N Drivers/Receivers/Transceivers applications.
- Wireless modems
- Cable network front end
- Bridges
- interconnection between computers
- Mainframes, workstations or storage devices
- Cell phones
- Notebook
- Satellite radio receiver
- TV signal transmission
- Precision geodetic measurement
