SN75ALS173NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 75ALS173 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 24mA |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS422, RS423, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Hysteresis | 50mV |
| Receive Delay-Max | 27 ns |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 4 |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75ALS173NSR Overview
This driver chip is excellent for driving common LEDs due to its enhanced 16-SOIC (0.209, 5.30mm Width) package.There is a Tape & Reel (TR) package for this receiver.Being a Receiver can transceiver, this part has empowered many solutions to serve for a variety of applications.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply requirements for this differential driver are 4.75V~5.25V.This electronic part can have?up to 0/4 eligible receivers/drivers on the field at once.?In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.This line driver ic can operate efficiently with a supply voltage range of 5V.In this wide receiver, 16 terminations are integrated for driving and receiving signals from data.A package consisting of 16 market standard pinouts is provided with this integrated circuit.The base part number 75ALS173 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An enhanced power dissipation control driver IC featuring 16 pins.There is a 5V input voltage supply that can be used to operate this transceiver module.The driver IC in this product is designed so that it can be powered by 5V.The box contains 4 receivers.The integrator circuit is embedded with 0 drivers.
SN75ALS173NSR Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
SN75ALS173NSR Applications
There are a lot of Texas Instruments SN75ALS173NSR Drivers/Receivers/Transceivers applications.
- Data center
- IPTV front end
- Cordless telephone
- Tuner
- Laser diode bonding
- Mainframes, workstations or storage devices
- LAN, SAN, WAN (local, storage, work area networks)
- Ethernet circuitry
- Remote controls
- VoIP phones
