SN75ALS176ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | 3-STATE DRIVER OUTPUT AND RECEIVER INPUT |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 75ALS176 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 30mA |
| Data Rate | 35 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 60mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Half Duplex |
| Supply Voltage1-Nom | 5V |
| High Level Input Current-Max | 0.00002A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75ALS176ADR Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-SOIC (0.154, 3.90mm Width) package.Cut Tape (CT) package is used to mount this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.With respect to the power supply, this differential driver uses 4.75V~5.25V.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.A package consisting of 8 market standard pinouts is provided with this integrated circuit.75ALS176 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.A 8-pin driver IC with enhanced power dissipation control is featured here.There is a capability of 1-bit resolution with this ic receiver.There are typically 1 bits of resolution specified in the specifications of this receiver.This transceiver module is designed to operate from an input voltage supply of 5V.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.This driver IC is designed to operate from a 5V power supply.There are 1 transceivers in total implemented by this IC.This optical transceiver module also features the 3-STATE DRIVER OUTPUT AND RECEIVER INPUT function, improving the overall signal management stability and accuracy.
SN75ALS176ADR Features
Cut Tape (CT) package
8 pin count
8 pins
5V power supply
SN75ALS176ADR Applications
There are a lot of Texas Instruments SN75ALS176ADR Drivers/Receivers/Transceivers applications.
- Wireless teaching
- Transmission stations
- Remote controls
- Automation systems
- interconnection between switches
- Bar, KTV wireless entertainment
- interconnection between computers
- transmission relay
- Fiber optic cable connection network
- Bridges
