SN75ALS176D
| Parameters | |
|---|---|
| Output Current | 60mA |
| Max Supply Current | 30mA |
| Data Rate | 35 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 60mV |
| ESD Protection | No |
| Simplex/Duplex | Half Duplex |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 1 |
| High Level Input Current-Max | 0.00002A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | 3-STATE DRIVER OUTPUT AND RECEIVER INPUT |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 75ALS176 |
| Pin Count | 8 |
| Output Voltage | 6V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 30mA |
SN75ALS176D Overview
With the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.In the Tube package, this receiver is mounted.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.The wide receiver can be mounted on any Surface Mount-type PCB or development board.This differential driver uses 4.75V~5.25V for power supply.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.Transceiver comes with 8 standard pinouts that meet the market's requirements.Since the base part number 75ALS176 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation control driver IC featuring 8 pins.An important feature of this ic receiver was its 1-bit resolution capability.This transceiver module is designed to operate from an input voltage supply of 5V.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.This driver IC is designed to operate from a 5V power supply.In addition to that, it contains 1 receivers as well.With the 3-STATE DRIVER OUTPUT AND RECEIVER INPUT function, this optical transceiver module improves accuracy and stability of signal management overall.If the input current exceeds 30mA, this can transceiver could malfunction.The device is capable of delivering voltage at the 6V axis.The output current of this bluetooth transceiver is 60mA.
SN75ALS176D Features
Tube package
8 pin count
8 pins
5V power supply
SN75ALS176D Applications
There are a lot of Texas Instruments SN75ALS176D Drivers/Receivers/Transceivers applications.
- Notebook
- Wireless 3D game
- Wireless projection application for business talks
- Mainframes, workstations or storage devices
- interconnection between computers
- Wireless access points
- Indoor ad hoc meeting
- Ship
- Satellite communications networks
- Satellite ground stations
