SN75ALS192D
| Parameters | |
|---|---|
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.002A |
| Out Swing-Min | 2 V |
| High Level Input Current-Max | 0.00002A |
| Number of Transmitters | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Driver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 950mW |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 75ALS192 |
| Pin Count | 16 |
| Output Voltage | 6V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 26mA |
| Nominal Supply Current | 45mA |
| Output Current | 100μA |
| Propagation Delay | 9 ns |
| Logic Function | Transceiver |
| Data Rate | 20 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/0 |
| Driver Number of Bits | 4 |
SN75ALS192D Overview
This driver chip is excellent for driving common LEDs due to its enhanced 16-SOIC (0.154, 3.90mm Width) package.The package of this receiver is Tube.Several solutions have used this Driver can transceiver in a variety of applications due to its Driver IC nature.The wide receiver can be mounted on any Surface Mount-type PCB or development board.It takes 4.75V~5.25V from the power supply to run this differential driver.It is possible to have up to 4/0 receivers/drivers in use simultaneously with this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.This line driver ic can operate efficiently with a supply voltage range of 5V.A package consisting of 16 market standard pinouts is provided with this integrated circuit.Since the base part number 75ALS192 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.An enhanced power dissipation control driver IC featuring 16 pins.It provided a 4-bit resolution capability with this ic receiver.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.It is capable of driving LEDs with a voltage of 26mA as the input voltage to this integrating circuit.4 transmitters are present, which are can transceivers that produce radio waves to transmit or send data with the help of antennas.Wide receiver provides the output voltage of 6V.In this bluetooth transceiver, we are able to get a maximum output current of 100μA.
SN75ALS192D Features
Tube package
16 pin count
16 pins
5V power supply
SN75ALS192D Applications
There are a lot of Texas Instruments SN75ALS192D Drivers/Receivers/Transceivers applications.
- Wireless smart house
- Changeing the frequency from IF to RF
- Wireless transmission
- Portable radio
- Remote controls
- Wireless 3D game
- Wireless multimedia center in smart home
- Low power, low voltage systems
- Gigabit Ethernet
- Satellite radio receiver
