SN75ALS193DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 75ALS193 |
| Pin Count | 16 |
| Output Voltage | 3.6V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 22mA |
| Output Current | 20μA |
| Max Supply Current | 35mA |
| Propagation Delay | 15 ns |
| Data Rate | 20 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS422, RS423 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Hysteresis | 120mV |
| ESD Protection | No |
| Receive Delay-Max | 22 ns |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75ALS193DR Overview
With the enhanced 16-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.Tape & Reel (TR) package is used to mount this receiver.Several solutions have used this Receiver can transceiver in a variety of applications due to its Receiver IC nature.The wide receiver can be mounted on any Surface Mount-type PCB or development board.Power supply for this differential driver is 4.75V~5.25V.This electronic part can have?up to 0/4 eligible receivers/drivers on the field at once.?IC receiver likes this one are designed for use in applications where operating temperatures are 0°C~70°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.As the base part number 75ALS193 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.This is a 16-pin driver IC with enhanced power dissipation control.This transceiver module is designed to operate from an input voltage supply of 5V.There is one driver IC in this package which is intended to be operated by 5V of power.Additionally, there are 4 receivers included in the package.Embedded 0 drivers are included on the integrator circuit.In the event that the input current reaches or exceeds 35mA, the can transceiver may malfunction.There is a capabilWide receivery to deliver voltage at 3.6V wWide receiverh this device.In this bluetooth transceiver, we are able to get a maximum output current of 20μA.
SN75ALS193DR Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
SN75ALS193DR Applications
There are a lot of Texas Instruments SN75ALS193DR Drivers/Receivers/Transceivers applications.
- Wireless communication
- Tuner
- Bar, KTV wireless entertainment
- Wireless HD Photography
- Wired telephone
- Military satellite communications
- SONET/SDH Network
- WDM transmission
- Radio transmission
- Wireless modems
